Follow us :

  • How to send your inquiry ?When you visit our website, and you are interested in our produce, you want to send inquiry to us.You can send to below email , and add our online contact way.Email: sales..........com sales1..........comOnline way:Mobile: 86 18502215393 / 13821163487Skype: hondabend, hondabendsWechat:+86 18502215393 / 13821163487QQ: 1312778086 / 3509663862If you want under...

  • What is the Order Process?Inquiry for the pipe fitting--offer with technical proposal and drawing--purchasing order--payment--production--Inspection--delivery.

  • How to order Pipe fittings?When you want to buy PipeBend and elbows etc pipe fittings, youwill advise below information, Including: Application, Standard, Radius, Length, Wall thickness, material, etc.So you will provide your enquiry list,sketch or drawing to me. We will make whole project to you according to yourrequirement.And accordingto your requirement, we can do good quality produce for you.

  • What is your main market?Our product has been exported to above 30countries and regions,.Such as North American, South American, Europe, Oceania,Middle East and Southeast Asian. We even can say our item is over the world.

  • Where is your factory located? How can I visit there?Our factory is located in Mengcun couny, Cangzhou City, Hebei Province, China. About 45 minutes from Cangzhou west station to our factory. And 120 kilometers from Tianjin International air port.

  • Are you a factory or trading company?We are factory. Welcome to visit our company.

  • Could you quote a price of this product? To save your precious time, please assist us with the detailed inquiry list including Item, Size, Quantity and the weight grade you demand. The more information you give us, the more favorable offer you will get. Clearly these factors affect price a lot.

  • Would you provide OEM/ODM service ?1.We are providing OEM services.2. Honda Bend is a professional factory of Pipe bend and Elbows, U Type bend and elbows, Socket & Threaded etc.

  • The Price can be lower?Of course you always can find the lower price. But how about the quality? How about the service cooresponding with the lower price? On the condition of same quality, same weight degree, we can offer the favorable price with satisfied service.

  • What is the quality control in the company?We inspect the Pipe fittings, according to ISO 9001 standard and test the product before delivery in our factory.

  • What is the payment terms for one order?Hondabend payment usually is 30% down payment by T/T. 70% balance by T/T or L/C at sight.But when payment are with some difficult. We can talk other payment way.

  • What test do you usually do?After manufacturing, we will make NDT inspection. About elbows,usually we use ultrasonic test by a certain percentage. If client needs special requirement,we will make as per their requirement.

  • Do you have the laboratory in your factory?Yes, we have.

  • How does your factory do regarding quality control?We have win the API certificate and ISO9001:2008.

  • If products have some quality problem,how would you deal with?We will responsible for all the quality problems if this had happen.

  • Can you supply FASTENERS?Yes, we can supply Bolt, U-bolt and screw nut.

  • What certificates have Honda Bend got?1.Honda Bend is verified by ISO9001, ISO14001.2.We got the certifications of CE for the products

  • After sales service.Quality us promised. If our products are not meet the contract we would like to send free goods to you.

  • Everybody told me the quality is good, the price is good. How can I trust you?With a history of more than 32 years, and around 8,000 Tons annual output. we are one of the leading manufacturer of Pipe fitting in China. We own high reputation of reliable quality and competitive price, and our brand is popular and approved in lot of markets such as Europe, America, Middle East, Africa, Asia, etc. You...

  • I Can't see the goods, touch the goods, how can I deal with the risk involved?We are Gold Supplier of Alibaba. We have established the quality management system conforming to ISO9000, and have got certified by BVQI. Great part of our products have been tested, approved by some predominant organization like UL, FM, BSI etc. We are absolutely worth your trust.

  • Stainless steel material control table:

  • Carbon steel is a metal alloy that is formed as a result of combining iron and carbon. Steel typically is considered to be carbon steel when the proportions of other trace elements in it do not exceed certain percentages. The maximum percentages typically are 1.65 percent for manganese and 0.6 percent for copper and silicon. The copper percentage must be at least 0.4 percent. Steel that also conta...

  • What is the difference between Pipe Bend and Pipe elbow?Pipe Elbow and Pipe Bend are both very common pipe fittings products which are used to change the flowing direction in a piping systems. Some times they are interchangeable, but not same.A pipe bend means a piece of pipe which are bent to some angle to join two pipings. they can be nearly any bending radius and angles. Pipe bends are commonl...

  • Heat-induction:An induction coil is placed around a small section of the pipe at the bend point. It is then heated to between 800 and 2,200 degrees Fahrenheit (430 and 1,200 °C). While the pipe is hot, pressure is placed on the pipe to bend it. The pipe is then quenched with either air or water spray. Heat-Induction bending is used on large pipes such as freeway signs, power plants, and petroleum ...

  • Definition of Pipe fitting:Pipe fitting is the occupation of installing or repairing piping or tubing systems that convey liquid, gas, and occasionally solid materials. This work involves selecting and preparing pipe or tubing, joining it together by various means, and the location and repair of leaks.Pipe fitting work is done in many different settings: HVAC, manufacturing, hydraulics, refineries...

  • Which industry will use Pipe bend, elbows, U type Bend and Socket & Threaded ?Usually Pipe Bend and elbows etc pipe fitting used for all walks of life.Ourarticle has been widely used in pipe works of Petroleum, Oil & Gas,Chemical, Electric power, Water Treatment, Refinery, Shipbuilding, etc. So Honda pipe bend and elbows pipe fitting use the range is very widely.

  • What kind of largest diameter seamless and welded pipe fittings available to producing in your workshops ?Bend & Elbow:The Largest diameter seamless 30", welded 96" TEE: The Largest diameter seamless 24", welded 96" REDUCER: The Largest diameter seamless 24", welded 96"

  • Types Of ASME B16.911 Socket Weld Fittings Socket Weld 90° Elbow Socket Weld 45° Elbow Socket Weld Tee Socket Weld Cross Socket Weld Full Coupling Socket Weld Half Coupling Socket Weld Pipe Cap Socket Weld Union Socket Weld Reducer Insert Socket Weld Boss Socket Weld Branch Outlet Socket Weld 90° Elbow Outlet Socket Weld 45° Lateral Tee Socket Weld Lateral Outlet Socket Weld Reducers Socket Wel...

  • sOME DETAILS OF SOCKET WELD FITTINGSSW Fittings are family of high pressure fittings are used in various industrial processes.They are used for lines conveying flammable, toxic or expensive material where no leakage can be permitted, and for steam 300 to 600 PSI.They are used only in conjunction with ASME Pipe and are available in the same size range.They are used in areas where pipe-work is perma...

  • ADVANTAGES AND DISADVANTAGES OF SOCKET WELD FITTINGSADVANTAGESThe pipe need not be beveled for weld preparation.Temporary tack welding is no needed for alignment, because in principle the fitting ensures proper alignment.The weld metal can not penetrate into the bore of the pipe.They can be used in place of threaded fittings, so the risk of leakage is much smaller.Radiography is not practical on t...

  • TYPES OF SOCKET WELD FITTINGS BY CLASS, SIZE AND WALL THICKNESSDescriptionClass Designation300060009000Elbows 45 and 90 degrees,Tees, Crosses, Couplings,Half-Couplings,End or Pipe Caps1/2 - 41/2 - 21/2 - 21/2 - 41/2 - 21/2 - 21/2 - 41/2 - 21/2 - 2Pipe Sizeby Wall ThicknessSCH 80 / XSSCH 160XXSPlugs and Bushings are not identified.They may be used up through Class 6000 NPS

  • Description of Forged Fittings, Socket-Welding and Threaded B16.11 - 2016:Upon request from industry and government, ASME has been defining piping safety since 1922.This Standard covers ratings, dimensions, tolerances, marking and material requirements for socket-welding and threaded forged fittings. These fittings are designated as Class 2000, 3000, and 6000 for threaded end fittings and Class 30...

  • Honda major products are as below:Hot Induction bend, Elbow, U type bend, Reducer, Tee, Socket & threaded, Flange etc.

  • The advantages of induction bending include:1. The ability to heat a specific area of the steel pipe will ensure a minimal amount of distortion occurs after the bend is completed.2. Induction bending results in higher energy efficient systems since the power required to create the bend is kept to a minimum.3. With the induction bending process, sand filling and internal mandrels are not required.4...